[Max01]

Bei Rocky Mountain reagiert bis dato niemand mehr auf mein Anfrage, welche ich über info@bikes.com gestellt habe.

Hier ist die Antwort auf meine erste Anfrage:

Hi Max,
No worries, we can help you with these questions.

1. The headset is an FSA Orbit No. 85, so as long as you buy compatible bearings for that you should be fine!
2. Hard to say, what sag percentage do you get at 200PSI? That may not be a serious issue, esp. if you're using your body weight without all of your riding gear on as a reference.
3. Please send pictures of this, I'm not familiar with their being interference issues to do with the BB cup size but for sure that is possible in theory with a lerge enough diameter. We use either Shimano or Raceface BBs from new, so those definitely offer enough clearance.

Thanks,
MAX MACKAY
TECHNICAL AND SALES REPRESENTATIVE - INTERNATIONAL


Und dies war meine Antwort vom 27.01.:

1.) so far the FSA headset bearing is working still smoothly.
Could you list me some compatible headset bearings please?

Unfortunately I got some annoying noises at the steeringtube, these are caused by the headset cups. Take a look at the pictures. And believe me they were well greased. There must be rubbing between the cups an the carbon. Any ideas to fix that?

2.) The Fox damper is still working fine with 200 psi at a rider weight of 65kg, Sag is at least 20mm (at RM blueprint are 160psi recommended for 64kg).

3.) Chris King bottom bracket isn't compatible to the new Altitude frame. Check pictures below. I bought a new one from Race Face.

Greetings